不同裂解温度对制备SiCf/Si-O-C复合材料性能研究

以聚硅氧烷为先驱体,研究先驱体转化过程中在不同的裂解温度下对制备SiCf/Si-O-C复合材料性能影响.结果表明,当裂解温度在700℃、800℃时,陶瓷基复合材料的弯曲强度分别为255.2 MPa、309.0 MPa;当裂解温度在1000℃时,陶瓷基复合材料的弯曲强度为45.3 MPa.对SiCf/Si-O-C复合材料的微观结构及载荷-位移曲线进行分析,发现界面结构是影响SiCf/Si-O-C复合材料性能的主要因素.     

NICALON(SiC)纤维增强铝预制丝透射电镜样品的研制

文中研究了用离子减薄法制备NICALON(SiC)/A1预制丝的透射电镜(TEM)样品。结果表明:用离子减薄法制备含有性质非常不同的组元(如碳化硅-铝复合材料)TEM样品是一种方便、有效的方法。运用TEM初步分析了所制出的预制丝样品。     

碳化硼表面金属化初步研究

为了降低碳化硼(B,C)与金属钎焊连接的温度,采用真空熔结Al基钎料的方法,在1000℃时对其进行了表面金属化处理,SEM和EDAX观察分析B4C与钎料结合断面的形貌和元素面分布,发现B4C与钎料界面发生了互扩散,界面结合致密,形成冶金结合.     

Combustion of B4C/KNO3 binary pyrotechnic system

Presented herein is an experimental study on the combustion of B4C/KNO3 binary pyrotechnic system.Combustion products were tested using X-ray diffraction(XRD),scanning electron microscopy(SEM),and energy dispersive spectrometer(EDS).According to the results of tests and CEA calculation,the combustion reaction equation was established.The flames and burning rates were recorded by a high speed camera and a spectrophotometer.The effect of B4C particle size on the thermal sensitivity of B4C/KNO3 was investigated by differential scanning calorimetry(DSC)techniques.In addition,a reliable method for calculating the flame temperature was proposed.Based on the results of experiments,the combustion reaction mechanism was briefly analyzed.The burning rate,flame temperature and thermal sensitivity of B4C/KNC3 increase with the decrease of B4C particle size.The mass ratio of B4C/KNO3 has a great effect on combustion properties.Oxidizer-rich compositions have low flame temperatures,low burning rates,and provide green light emission.The combustion reactions of fuel-rich compositions are vigorous,and the B4C/KNO3 with mass ratio of 25:75 has the highest burning rate and the highest flame temperature.     

Microstructural characterization of silicon carbide reinforced dissimilar grade aluminium explosive clads

Aluminium composites are inevitable in ship building, commercial and defence aircrafts construction due to their light weight, high strength to weight ratio, admirable properties and cost affordability. In this study, the microstructural characteristics of explosive cladded dissimilar grade aluminium (Al 1100-A1 5052) clad composites reinforced with silicon carbide (SiC) particles is presented. Microstructure taken at the interface by optical and scanning electron microscopes (SEM) revealed the formation of a silicon carbide layer between the dissimilar grade aluminium sheets. Though reaction layers were witnessed at few locations along the interface, the diffusion of atoms between the participant metals is not visible as confirmed by energy dispersive spectroscopy, elemental mapping, line analysis and X-ray diffraction (XRD). The variation in microhardness at various regions of the silicon carbide reinforced dissimilar aluminium explosive clad is reported. The increase in tensile strength of the SiC laced clad is also presented.     

添加SiC微粉对硅树脂先驱体转化3D Cf/Si-O-C材料性能的影响

以三维碳纤维织物和廉价的硅树脂为原料,采用先驱体转化工艺制备3D G/Si-O-C材料,考察了浸渍液中添加SiC填料对材料微观结构、力学性能和抗氧化性能影响.结果表明:添加适量的SiC填料有助于减少基体孔隙,改善界面结合,从而提高材料的力学性能;而SiC含量过高时,容易在材料内部形成闭孔,从而导致材料力学性能下降.当SiC微粉含量为18.2%时,材料具有最好的力学性能,弯曲强度和断裂韧度分别为421.3MPa和13.0 MPa·m1/2;而材料的抗氧化性能随着SiC微粉含量的增加而增加,当SiC微粉含量为25.0%时,材料的弯曲强度保留率最高,达到了89.5%.     

3D SRAM中TSV开路测试算法研究与实现

基于三维集成电路技术实现的三维静态随机存储器,其电路中使用了大量的过硅通孔。目前过硅通孔制造工艺尚未成熟,使得过硅通孔容易出现开路或短路故障,从而给三维静态随机存储器的测试带来新的挑战。现有的过硅通孔专用测试方式虽然能够探测出过硅通孔的故障,但需要特定的测试电路来实现,这就增加了额外的面积开销,同时加大了电路设计的复杂度。因此,提出一种使用测试算法来探测过硅通孔开路故障的方法。在不增加额外面积开销的情况下,通过内建自测试电路解决三维静态随机存储器中过硅通孔的开路故障检测问题。结果显示,该过硅通孔测试算法功能正确,能够准确探测到过硅通孔的开路故障,并快速定位过硅通孔的开路位置。     

化学气相沉积碳化硅超光滑抛光机理与表面粗糙度影响因素

为实现化学气相沉积碳化硅(CVD SiC)的超光滑抛光,采用纳米划痕试验研究了化学气相沉积碳化硅脆塑转变的临界载荷,根据单颗磨粒受力对其抛光机理进行了分析,并从材料特性、工艺参数以及抛光液pH值三个方面对其表面粗糙度影响因素进行了系统的试验研究.研究结果表明:化学气相沉积碳化硅的稳定抛光过程是磨粒对碳化硅表面的塑性域划痕过程;CVD SiC的晶粒不均匀与表面高点会降低晟终所能达到的表面质量;表面粗糙度在一定范围内随磨粒粒度增加呈近似线性增长,随抛光模硬度的增加而增长;抛光压强对表面粗糙度的影响规律与抛光模的变形行为相关,当抛光模处于弹性或弹塑性变形阶段时,表面粗糙度随抛光压强的增加呈小幅增长,而当抛光模包含塑性变形之后,表面粗糙度基本与抛光压强无关;此外,抛光速度和抛光液pH值对表面粗糙度的影响不大.研究结论为CVD SiC超光滑抛光的工艺参数优化选择提供了定量的试验依据.     

Effect of silicon carbide and wire-mesh reinforcements in dissimilar grade aluminium explosive clad composites

Aluminium composites are inevitable in the manufacture of aircraft structural elements owing to less weight, superior corrosion resistance and higher specific properties. These composites reduce the weight of the aircraft, improve the fuel efficiency and enhance the maintenance duration. This study proposes the development of dissimilar grade aluminium (aluminium 1100-aluminium 5052) composites with different reinforcement’s viz., stainless steel wire-mesh, silicon carbide (SiC) powders and SiC powder interspersed wire-mesh, by explosive cladding technique. Wire-mesh enhances the friction and restricts the movement of flyer plate to craft a defect free clad, while SiC particles form a band on the interface. Highest strength is obtained when SiC powder interspersed wire mesh is employed as reinforcement. The dissimilar aluminium explosive clad with SiC particle reinforcement results in lower strength, which is higher than that of the weaker parent alloy and that of the conventional dissimilar aluminium explosive clads without any reinforcement.